Metal Corner Guards & Kick Plates

Aluminum & Stainless Corner Guards

Aluminum & Stainless Steel Corner Guards

In commercial or industrial work environments – such as commercial kitchens, supermarkets, hospitals or manufacturing facilities – large, sometimes heavy equipment has to be maneuvered along narrow passageways and around tight corners. It is inevitable that at some point, they will knock against the walls and corners causing damage.

To protect your walls and corners as well as your equipment, and to keep your work environment looking good, aluminum or stainless steel corner guards are the way to go. You will no longer have to replace or repair cracked and chipped drywall, or attempt to match colors when repainting damaged areas when using metal corner guards.

Applications

Stainless steel and aluminum corner guards are perfectly suited to a wide variety of industrial, commercial and residential applications, and are ideal for medium to high impact areas like in:

  • Hospitals
  • Parking garages
  • Loading docks
  • Restaurants
  • Food processing areas
  • and others

Our selection of metal corner guards is perfect for any project you may have.

Stainless Steel Corner Guards

Stainless steel corner guards are ideal for kitchens, sanitation areas, as well as hospitals, providing a modern, attractive option for effective corner protection.

Our stock features include:

  • 90 degree angles
  • Brushed or polished finish
  • Straight or flanged
  • 16 or 18 gauge
  • 4′ or 8′ lengths
  • 1/8” radiussed corners

We can also manufacture stainless steel corner guards to your exact specifications.

Aluminum Corner Guards

Ideal for any environment where an industrial or high-tech look is required, aluminum corner guards offer excellent protection for drywall, brick and plaster corners, or even the exposed corners of industrial machines, fridges, freezers, etc.

Choose from the following finishes:

  • Anodized black
  • Etched and anodized satin clear
  • Anodized bronze
  • Mill finish, or as extruded

All of our aluminum corner guards are available in stock lengths of 4′, 6′, 8′ and 12′, or we can customize to your specific requirements.

Eagle Aluminum Corners

Lexan Corner Guards

Lexan Corner Protectors

lexan-burst
Every corner guard Eagle Mouldings sells is made of Lexan – the near indestructible poly carbonate material used in car bumpers, among other things. Clear Lexan corner guards are guaranteed to last for years without cracking, chipping, warping, or yellowing. Installed with screws or brads (included).

View Products

Advantages of Colored Corners

colors-burst

  • Because you can’t see through it, there is no need to patch any imperfections that your corner may have.
  • Can be glued on eliminating the need for screws resulting in a cleaner look. Custom drilling or tape available.

Stainless Steel Kick Plates

Kick Plates

Eagle Mouldings offers both stainless steel and aluminum kick plates. Both are commonly found and used in commercial environments.
If installed properly and with the proper care, kick plates should last through the life of the building and offer excellent protection for doors and under counter skirts.

Selecting Kick Plates for Your Application

When choosing aluminum versus stainless steel kick plates, keep in mind the intended use of the door.

The standard height is anywhere from 6 inches to 24”, but there are many different options available:

  • Mop Plate – 8″ high and installed flush with the bottom of the door. Used to prevent janitorial mops from damaging the door.
  • Armor plate – anything up to 48″ high, and covers the entire bottom half of the door.
  • Stretcher plate – used in hospitals to prevent damage from gurneys and stretchers. Usually between 6″ and 12″ high, and installed at the approximate height of the handle, parallel to the floor.

A kick plate should always be ordered 2 inches narrower than the width of the door so that it doesn’t get in the way of the doorjamb when you are closing the door.

View Products

Eagle Mouldings Kick Plates

Placing Your Order

At Eagle Mouldings, we custom manufacture kick plates to your exact specifications and requirements. When you place an order with us, please remember to specify the following:

  • Material – stainless steel or aluminum
  • Dimensions – width and height
  • Thickness (gauge) – 16 or 18
  • Drilled or undrilled
  • Finish – polished or brushed (stainless steel only) or anodized (aluminum only)
0
PRODUCTS & SERVICES